[英文介绍]NePort系列高性能嵌入式联网模块,串口转以太网rj45模块--支持1-3路高速串口,集成PoE,超低功耗

*超小体积、高度集成、高可靠、高性能、多功能、低成本、低功耗,快速而简单的实现设备联网。 *使用NePort系列开发联网产品可大大简化产品开发的工作量和难度,降低开发成本,缩短产品上市周期。 *确保所有串口同时在可选的最高波特率下,双向全速不间断传输数据不丢包,是业界唯一具有此性能的高可靠产品。 *NePort全系列可选支持POE功能,直接使用网络供电。 *另有超低功耗PL系列,模块功耗低于0.18w(<50mA@3.3V)。

[英文介绍]NePort系列高性能嵌入式联网模块,串口转以太网rj45模块--支持1-3路高速串口,集成PoE,超低功耗

NePort Overview

The NePort is the most compact, integrated solution available to web-enable any device with an RS-232 serial interface. By simply adding NePort to a product design, device manufacturers cut their design cycle by as much as 80% and are able to offer Ethernet connectivity in record time.

The NePort offers the highest level of integration available in a device server. Within a compact RJ45 package is a 32bits RISC, 10/100 Ethernet transceiver, high-speed serial port, status/diagnostic LEDs, and 2 programmable I/O pins. In the space that is normally consumed by a connector, the NePort provides a complete networking interface.

To enable access to a local network or the Internet, the NePort integrates a fully developed TCP/IP network stack and robust RTOS. The NePort also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.

Where there’s a need for custom user interfaces and a desire to use common and familiar tools, the NePort can serve web pages to a web browser. The NePort becomes a conduit between you and your device over the network or Internet.

The Windows -based configuration software, DeviceInstaller, simplifies installation and setup. The NePort can also be set up locally through its serial port, or remotely over a network using Telnet or a web browser. Flash memory provides for maintenance-free nonvolatile storage of web pages, and allows future system software upgrades.

Using our highly integrated hardware and software platform, you will add profit to your bottom line by significantly reducing product development time, risk, and cost.

NePort Overview

Key Features

[英文介绍]NePort系列高性能嵌入式联网模块,串口转以太网rj45模块--支持1-3路高速串口,集成PoE,超低功耗

The only complete, integrated solution in an RJ45 form factor

Complete integrated solution RS-232/485/422 support Embedded web server

10/100Mbit Ethernet – Auto-Sensing

Stable, field proven TCP/IP protocol suite and webbased application framework

Easy configuration through a web interface Easy customization of HTML web pages and configuration screens

Interactive web pages through the use of Java applets

E-mail alerts

FTP server / client for file transmission SD/MMC card as local/remote file storage

SSL/TLS support 128-, 192-, 256-bit AES or Tri - DES encryption (Optional)

EMI tested and compliant

Extended operating temperature: -40 to +85û C Industrial Model 0 to +75û C Commercial Model High-performance processor (55MIPS on 32bits RISC)

Network overhead handled by NePort Password protection

Upgrade NePort’s bootloader and firmware over the network and Serial port 3.3V power

Serial-to-10/100 Ethernet conversion Offer 1/2/3 serial ports, baud rate up to 921,600bps

Protocol and application

With robust RTOS embedded in a 32bits RISC

ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP,

HTTP, for network communications.

TCP, UDP, and Telnet for connections to the serial port. TFTP for firmware updates.(E version) FTP for file transmission

IP for addressing, routing, and data block handling over

the network.

User Datagram Protocol (UDP) for typical datagram

applications in which devices interact with other

devices without maintaining a point-to-point connection.

More details of protocol support

see the NePort user guide.

Page 1 of 7

你可能喜欢

  • 接口封装
  • RJ45接口
  • 学习心得
  • 嵌入式系统
  • 网卡驱动

[英文介绍]NePort系列高性能嵌入式联网模块,串口转以太网rj45模块 支持1 3路高速串口,集成PoE,超低功耗相关文档

最新文档

返回顶部