中兴PTN命令汇总

中兴PTN命令大全

查看命令
show run-config
show start-config
show power
show vlan
show inter bri
show ip inter bri
show run interface
show op in xgei_x/y
show lldp neighbor
show run | be router
show run | be snmp
show run | be tunnel
show run | be vfi
show run | be cpi
show boot
show nm
show version
show arp
show mac
show logg notify
show logg courent
show logg histroy
set fan-speed auto /full
ftp-server enable
ftp-server tick-user 1
clear counter gei_x/x
ping ip re 1000 lim 0 快速检车掉包情况

文件操作
wr
sync startrun to agent(6100)
redundancy /red for
write imgfile slave

dir
cd cfg
delete startrun.dat
cd ..
cd db
delete *.*
rename startrun.dat startrun.bak

备份
copy flash: /cfg/startrun.dat ftp: //服务器ip/startrun9000.dat@9000:9000
copy flash: /img/zxr10.zar ftp: //服务器ip/zxr10.zar@9000:9000


copy flash /cfg/startrun.dat ftp //服务器ip/63-1startrun.dat@sysbak:sysbak

上传
copy ftp: //129.12.50.200/zxr10.zar@sysbak:sysbak flash: /img/zxr10.zar

主备对拷:
copy flash /img/zxr10.zar flash /sl_img/zxr10.zar

接口配置
con t
interface gei_x/y
out_index 11
negotiation auto
jumbo-frame enable
switchport mode trunk
switchport trunk native vlan vlan-id
switchport trunk vlan vlan-id
switchport qinq normal
dul full
speed 100/1000

光口自环取消
inerface gei_x/x
no loopback

interface vlan 100
ip add 192.16.1.4 255.255.255.0
set arp static 192.16.1.9 00d0.d061.0601
exit

show vct interface gei_3/1
show this
show run | in mng
Show run | begin cip
Show run | begin vfi

conf t
cip X
oam-maping enable tmpls-oam

修改MAC地址命令
show lacp sys-id 机架MAC(出厂MAC)如果不激活可能和MEMORY和NVRAM的不一致 MEMORY地址必须重启后才能生效
olleh
mac-base-addr show
mac-base-addr show master nvram
mac-base-addr show slave nvram
mac-base-addr show slave mem
mac-base-addr delete master all
mac-base-addr add master XXXX.XXXX.XXXX 16(9008)/8(6300&6200)
mac-base-addr add master mng XXXX.XXXX.XXXX 1
mac-base-addr enable master
mac-base-addr enable slave
reload
mac-base-addr syn

ospf路由宣告
show ip ospf 查看OSPF进程的详细信息
show ip ospf interface 查看OSPF接口的现行配置和状态
show ip ospf neighbor 查看OSPF邻居的信息
show ip ospf database 查看一个链路状态数据库的全部或部分信息
show run | be router

show ip ospf database database-summ 路由器发布了 lsa条目
show ip ospf retransmission-list 是否有重传 检查IP地址冲突常用命令
clear ip ospf proceed 1重启ospf进程


router ospf 1
passive-interface vlan x x监控vlan 多个接入网元监控VLAN隔离
network XXX.XXX.XXX.XXX ZZZ.ZZZ.ZZZ.ZZZ area 0



no network XXX.XXX.XXX.XXX ZZZ.ZZZ.ZZZ.ZZZ area 0

terminal monitor (no)
debug ip ospf all查看信息是否存在ID相通
debug ip ospf adj 打开回送OSPF邻接事件调试信息的

你可能喜欢

  • 常用命令
  • 华为PTN
  • 烽火SDH
  • 华为培训
  • 移动PTN
  • PTN保护

中兴PTN命令汇总相关文档

最新文档

返回顶部