元器件交易网www.wendangwang.com

DFLT5V0A - DFLT51A

225W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

PowerDIä123

Features

NEWPRODUCT

··············

225W Peak Pulse Power Dissipation (10ms x 1000mswaveform)

5.0V - 51V Standoff VoltagesExcellent Clamping Capability

Lead Free Finish, RoHS Compliant (Note 6)"Green" Molding Compound(No Br, Sb)

Qualified to AEC-Q101Standards for HighReliability

Mechanical Data

Case: PowerDIä

123

Case Material: Molded Plastic, "Green" MoldingCompound. ULFlammabilityClassification Rating94V-0

Moisture Sensitivity: Level 1 per J-STD-020CTerminal Connections: Cathode Band

Terminals: Finish¾Matte Tin annealed over Copperleadframe.Solderableper MIL-STD-202,Method 208e3

Marking & Type Code Information: See Last PageOrdering Information: See Last PageWeight: 0.01 grams (approximate)

@ TA= 25°C unless otherwise specified

Maximum Ratings

Thermal Characteristics

@ TA= 25°C unless otherwise specified

Notes: 1. Non-Repetitive current pulse as shown in figure 3 and derated above TA= 25°C as per figure 1.

2. Non-Repetitive current pulse as shown in figure 5 and derated above TA= 25°C as per figure 1.

3. Device mounted on 1"x1", FR-4 PCB; 2 oz. Cu pad layout as shown on Diodes Inc. suggested pad layout document AP02001.pdf.4. Theoretical RqJScalculated from the top center of the die straight down to the PCB/cathode tab solder junction.5. 1/2 sine wave (or equivalent square wave), pulse width = 8.3ms, duty cycle = 4 pulses/minute maximum.

6.RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, seeEU Directive Annex Notes 5 and 7

.