20-Nov-2006 Rev A

USB Connector,A SERIS

1. SCOPE

This specification covers performance, tests and quality requirements for USB CONNECTOR,A SERIES. 2. APPLICABLE DOCUMENT

The following documents form a part of this specification to the extent specified herein. In the event of conflict between the requirements of this specification and the product drawing, the product drawing shall take precedence. In the event of conflict between the requirements of this specification and the referenced documents, this specification shall take precedence. 3. REQUIREMENTS

DESIGN AND CONSTRUCTION

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing.

MATERIALS

A. Housing：Thermoplastic High Temperature, UL94V-0

B. Contact：Phosphor Bronze, Gold plating on contact area, Tin plated on solder tails,

Nickel underplated all over. C. Shell: Brass, Nickel plating over all.

RATINGS

A.. Current Rating： 1.5 A B. Voltage Rating： 30 VDC

C. Operating Temperature：-55℃ to +85℃

3.4. TEST CONDITION

The product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure1.