Miniature One-touch Fittings One-touch Mini

Series KJø4,ø6 Applicable Tubing:ø2,ø3.2, Connection Thread: M3, M5, R 1/8 Guide 1 Guide 2 Chuck Suitable for use with nylon, soft nylon and urethane. Large retaining force. The chuck provides a secure bite, while retaining force is increased.

Release button (Light gray) Light force for removal When the fitting is removed from the tubing, the chuck and collet are released, thus preventing them from biting into the tube to an unnecessary degree. Unique shape allows easy tube release.

Seal Can be used for a wide range of pressures from a low vacuum up to a pressure of 1 MPa. The use of a special profile ensures sealing and reduces resistance when the tube is inserted.

Tube Body (White) O-ring Stud Effective when piping in a confined space. The body and the threaded portion can rotate (for positioning to some extent). Stud is electroless nickel plated. Standard with preapplied sealant for R 1/8 thread

Gasket

PAT.PEND

Optimum piping in less space with 20% reduction of the outside diameter. Thread with sealant is standard. Copper-free specifications (With electroless nickel plated.) Possible to use in vacuum to–100 kPa.

Applicable Tubing Tubing material Tubing O.D. Note 1) Soft nylon tubing is not compatible with water.

FEP, PFA, Nylon, Soft nylon(1), Polyurethaneø2,ø3.2,ø4,ø6

Specifications Fluid Operating pressure range (3) Proof pressure Ambient and fluid temperature Thread Mounting section Air/Water (2)–100 kPa to 1 MPa 3 MPa–5 to 60°C, Water: 0 to 40°C (No freezing) JIS B0203 (Taper thread for piping), JIS B0205 (Metric coarse thread) JIS B0205 (Metric fine thread) With sealant Brass parts are all electroless nickel plated.

Nut section Seal on the threads (Standard) Copper-free (Standard)

Note 2) The surge pressure must be under the maximum operating pressure. Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.

Principal Parts Material Body Stud Chuck, Guide 2 Release button Seal, O-ring Gasket Guide, Guide 1 Guide forø2 Stainless steel 303, C3604, PBT C3604 (Thread portion) Stainless steel 304 POM NBR PVC, Stainless steel 304, NBR PBT C3604

Made to Order (Refer to page 26 for details.)

18